Setting Up Your JVC TV

Remote

  1. Turn on your TV.
  2. On your Tune In remote, press TV and release.
  3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
  4. Enter code 053 for your JVC TV. The green light will blink twice if you have performed this procedure correctly.
  5. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5 using the code listed in step 4. If your TV still doesn't turn off, call (937) 866-9006 for help.

Now Test Your TV

Why test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.

  1. Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
  2. If your TV does not pass the test, return to Step 2 at the top of this page. Using the three-digit code listed in step 4 repeat the process. If your TV still doesn't pass the test, call (937) 866-9006 for help.
Remote

Return to

Devices Set Up

Devices Set Up

Return to

Set Up TV

TV Selection.