Setting Up Your Sony CD Player
- Turn on your CD player and insert a compact disk.
- On your Tune In remote, press Shift/TV and release.
- Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
- Enter code 000 for your Sony CD player. The green light will blink twice if you have performed this procedure correctly.
- Aim Tune In at your CD player and press Power. Your CD player should turn off. If your original CD player remote control did not have a Power key, press Play. Your CD player should start to play. If your CD player does not respond, repeat steps 2-5, using the code listed in step 4. If your CD player still doesn't respond, call (937) 866-9006 for help.
Now Test Your CD Player Code
- Press the Power key to turn on the CD player. Test all six (6) compact disk control keys.
- If your CD player does not pass the test, return to Step 2 at the top of this page. Using the three-digit code listed in step 4 repeat the process. If your CD player still doesn't pass the test, call (937) 866-9006 for help.
Return to |
 |
|
Return to |
 |
|