Setting Up Your Magnavox Cable Box

Remote

  1. Turn on your cable box.
  2. On your Tune In remote, press Cbl and release.
  3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
  4. Enter code 027 for your Magnavox cable box. The green light will blink twice if you have performed this procedure correctly.
  5. Aim Tune In at your cable box and press Power. Your cable box should turn off. If it does not, repeat steps 2-5, using the code listed in step 4. If your cable box still doesn't respond, call (937) 866-9006 for help.

Now Test Your Cable Box Code

Why test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your cable box.

  1. Press the Power key to turn on the cable box; then press channel scan ("CH"). Tune channels 7 and 11 by entering the number followed by the Enter key.
  2. If your cable box does not pass the test, return to Step 2 at the top of this page. Using the three-digit code listed in step 4 repeat the process. If your cable box still doesn't pass the test, call (937) 866-9006 for help.
Remote

Return to

Devices Set Up

Devices Set Up

Return to

Set Up VCR

Cable Box Selection.